1. Subcontroller thermostat
3. Electric actuators
4. CCT-10 Hub Controller
CCT-10 Hub controller
CCT-10 hub controller is developed according to market's requirements, it is applied to control the gas boiler, circulating pump or electric actuator, to achieve comfortable temperature control purposes, reduce energy consumption.
Power Supply: 170-240VAC 50\60HZ
Current Load: 3A
Size: 240mm X 110mm X 42mm
Working Temp: -20 - 60 celsius
Storage Temp: -20 - 70 celsius
Logo: With Beok logo
User manual: https://www.dropbox.com/s/1rrn99s0bnhyn1r/CCT-10%20Hub%20Controller.pdf?dl=0
1. Due to product upgrades, the CCT-10 hub controller is now only used to connect Normally Closed(NC) electric thermal actuators!
2. This is wired hub controller, the hub and the thermostat and the actuator are all wired. WiFi means that the thermostat can be controlled by the mobile phone through the APP.
3. CCT-10 has no instructions in the package due to some reasons. Customers in need can download it from this link, thanks for your understandng. https://www.dropbox.com/s/1rrn99s0bnhyn1r/CCT-10%20Hub%20Controller.pdf?dl=0
If you want to debug or check whether the main controller is working properly, you can press and hold the debug key before power on then press power key, while time is delay so you can quickly check the debugging requirements of the function (without operation for 20 minutes debugging function fail).
The DIP switch can adjust the working time required for the delay, according to product indicator position adjustment.
(1) Before installation, removal, cleaning or maintenance of controller, you must cut off the main power, unplug the fuse or
turn off the switch circuit breaker;
(2) You must read the instruction in detail before installing the controller, and strictly operate thermostat accordance to
(3) Controller should be installed by professional engineering company with appropriate safety knowledge;
(4) All wires connections should meet local and national standard;
Our thermostat is luxurious programmable thermostat with large screen display. It is applied to temperature control of water heating applicance, especially used in Water Floor Underfloor Heating System, such as water valves and actuators .
WIFI type thermostats can be controlled by mobile phone remotely ！
Power Supply: 200-240V; 50-60Hz Current Load: ≤16A(electric),≤3A(water)
Power Consumption: <0.3W Warranty time : 2 years
External Material: PC+ABS (flame retardant) Sensing Element: NTC
Set Temp. Range: 5-60 Celsius Floor Set Temp. Range: 5-99 Celsius
Accuracy: ±0.5 Celsius Dimension: 86x86x45mm
Storage Temp.: -5~55Celsius Certificate: CE/ROHS
Thermal Electric Actuator
RZ-AN 230 thermal actuator is a two point form switching device which has been tested
by TUV. It is usually applied to control radiator, floor heating system or zone valves. It
can automatically close the flux of system under the control of room thermostat and
otherelectrical switch. This model only can be used as on-off administrator.
Actuator Used to Connect with Manifolds---
1. Easy to connect with power:
user only needs to reserve main supply in the place of manifold before installation, and directly connect one three-wires cable to
thermostats. So user do not need professional wiring workers;
2. Easy to connect wires: user only needs to connect wires according to wire colors;
3. Easy maintenance after installation: all wires are very clear and neat;
4. To protect boiler or pump:
because hub controller has time delay function, it opens boiler and pump only when water valve is totally opened, and closes boiler when temperature reaches requirements. Time delay to open boiler and pump when heating can realize the purpose of energy-saving;
5. To extend boiler and pump life:
hub controller only start boiler and pump in appropriate temperature, in this way, it will reduce boiler and pump running time, to
extend their working life.